1 Cindi Bisson McGee - Behind These Eyes : Cupcake Birthday Party - DCC & Little B™ Blog Hop

Thursday, October 22, 2015

Cupcake Birthday Party - DCC & Little B™ Blog Hop

“Little B” Cupcake Birthday Party 

This month the Designer Craft Connection is having a blog hop featuring products from Little B™ LLC.  Each participating Designer got a big box full of creative products to work with - dies, punches, dimensional stickers, Washi tape, paper flowers, and more!  It was like Christmas in September!    The themes of the boxes varied with each Designer so there are sure to be a great assortment of projects to inspire you.  

My box was primarily Birthday themed - with lots of fabulous cupcakes.  So I decided to create a variety of party projects for a Cupcake Birthday Party.  A table display, treat holders, a jar to hold plastic utensils, and cupcake decorations.

Little B™ is also sponsoring an amazing give-away as part of this hop!  $150 worth of product!  Enter using the Rafflecopter link below.

To enter, you must "like" the Little B™ FB page and comment on the blog posts. It's 2 pts for each comment, so the more comments the better the chance you have to win!   Enter until  10/29/15 at 12:00 AM CDT.

Rafflecopter - Little B Giveaway

Be sure to click on the link in the column on the right to find out what the other Designers are sharing too! 




Materials:

These are the Little B™ products used to create these projects
Little B™ Dimensional Stickers 
                - 100144 Cupcakes 
                - 100157 Birthday  Cupcakes 
                - 100167 Birthday 
Little B™ 100600 Happy Birthday Cutting Dies 
Little B™ 100407 Perfect Positioned
Little B™ 100357 Silver Foil Diagonal Stripes Washi Tape - Specialty Foil Tape 
Little B™ 100369 Scallop Circle Punch
DCWV Solstice Stack Patterned Cardstock
Westcott® Scissors 
Toner Fun Wire™ - Marshmallow 
Sizzix® Big Shot™ Machine
White Duck® Tape                  Beacon® 3-in-1 Adhesive 


Instructions:

Table Decoration  

Note:  This die is meant to cut a single piece which is folded to form a card.  Because I wanted to attach several together and create a tabletop decoration instead, I cut the card stock into squares, and placed the first and last pieces face down, and the center piece face up so the words would all be readable on the colored side of the patterned card stock.  If you are using card stock which is colored on both sides, you can cut them as a single piece and cut apart afterwards.  Use Sizzix® Big Shot™ machine and Little B™ Happy Birthday cutting die to cut four different colors of each word. (Little B™ dies come in a fantastic magnetic storage folder - this thing is genius and all of these type of dies should come packaged this way!  No more hunting through a box or bag of dies that have fallen out of the paper packet they come in!)  The Little B™ Perfect Positioner made it easier to die cut because it made it simple to align the die straightly for a perfect cut.   

Attach the words to spell out two sets of Happy Birthday To You.  I placed a small piece of white Duck® tape on the back of each set to hold the words together. (I used Duck® tape because it is a bit sturdier than regular tape would be for holding the pieces in place.)  Repeat with second two sets.  Add Little B™ Silver Foil Diagonal Stripes Washi Tape along bottom edge of both sets of words. 

Add medium sized cupcake from Little B™ Birthday dimensional sticker set to each set of words as shown.  






Cut rectangular piece of 4 1/4" x 3" piece of coordinating patterned card stock and strip of another card stock about 1” wide x 4 1/4".  Mount strip to rectangle as shown using Beacon® 3-in-1 Adhesive.  Mount large cake from Little B™ Birthday set of dimensional stickers.

Attach a set words to each side of rectangle with cake.   Fold, using mountain and valley fold technique, to create table decoration.


Treat Holders 

The size of these treat holders can be adjusted accordingly.  These were made to hold a small bracelet which was made for each guest.  

Cut pieces of coordinating patterned card stocks for however many party goers you expect.
I cut mine 3 1/2” x 9”, then ended up trimming them back a bit afterwards.  

Use Little B™ Scallop Circle punch to punch each piece of card stock on one 3 1/2” end.  Save punched circles for later.

Cut squares of plastic sheet from sticker packaging and use 3-in-1 Adhesive to mount on back side of each piece over punched out area.  

Create two scored lines about 1/4” apart approximately 3 1/2" from edge with punched circle.  Fold and glue together on
sides, letting the scored lines form a bottom for each holder (these will be a small gap - this did not matter for my treats as they would not fall through the gaps).  (This is where I cut the extra from the top - as I said - adjust your size according to the treat that will be given out - my finished holders are about 3 1/2" top to bottom.)
Add a Little B™ cupcake sticker from the Cupcakes set to each window on the treat holders.  Add a piece of the Silver Foil Diagonal Stripes Washi Tape to the top and bottom of each holder.  Place bracelets inside.

Utensil Holder 

Even though cupcakes were the focus, a side of ice cream was still on the menu, so we offered forks or spoons to our guests.  This decorated jar was a fun way to hold them.

Place large cupcake from Little B™ Birthday Cupcakes large dimensional sticker set on the front of the glass jar.  

Add a strip of Silver Foil Diagonal Stripes Washi Tape to the top and bottom of jar.  The tape and the sticker will easily remove from the glass after the party. 

Insert coordinating color of tissue paper an add forks & spoons. 


Cupcake Decorations  

This is an easy and fun way to add some pizazz to the birthday cupcakes without purchasing expensive pre-made decorations.  There's even a special cupcake for the birthday girl.

Cut 14, 6” pieces of Marshmallow/white Toner Fun Wire™.  About 1/2” from one end, coil around straw or pencil ending about 1/4" from opposite end.

Cut apart Birthday Party banner from Birthday dimensional sticker set to create individual letter pennants.  

Use 3-in-1 Adhesive to mount each pennant letter to the 1/4” straight end of wires. 

From punched scalloped circles cut apart and mount together to make one multi-colored circle as shown.  Insert coiled wire without a pennant letter through center.   This will hold a birthday candle for the birthday girl to blow out on her cupcake.

Add each embellishment to the center of a cupcake.  Arrange on table or serving tray to spell out Birthday Party.  

Tip:  If your party goers can’t agree on where to sit at the table - arrange them in order according to which letter cupcake they chose to spell out Birthday Party!




8 comments:

cghundley said...

Wonderful party decorations!
They would be fun to make
and use.
Carla from Utah

Meme said...

These would be fun to make party banners and cards with! Fabulous job!

jordanbev5@yahoo.com said...

Wowsers! That cupcake topper is amazing! Love all the creative ways you made these wonderful birthday themed projects! Everyone going will so enjoy all the treats and cupcakes! Great ideas!

barbara macaskill said...

Oh my gosh! What a fun Birthday party setup! Would love to create something similar for my grandchildren's parties!!! I am really craving one of those cupcakes now!! LOL TFS!

Erin Reed said...

super cute!!

ansharas_atticbymaryann said...

Great party deco!

Annmakes said...

Wow, even the stickers look so yummy! Very pretty.

Cheyenne Fridge Repair said...

Greeat read thanks